ACROSS INTERNATIONAL – 30C 40L RECIRCULATING CHILLER W/ CENTRIFUGAL PUMP – 220V

$14,778.43

SKU: C30-40-50L-UL.220 Category:

Ai -30C Recirculating Chillers is an economical thermostatic control laboratory chiller. These laboratory chillers are ideal for cooling applications such as rotary evaporators, jacketed reactors, and condensing coils. This system replaces tap water cooling applications in the laboratory.

-30C Recirculating Chillers are compressor-based recirculating chillers that offer outstanding performance, high reliability, quiet operation, and ease of use. A powerful force/suction pump provides constant flow rates, while a microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.

IMPORTANT! -30C/-22F ULTIMATE TEMPERATURES ARE TESTED UNDER EMPTY LOAD CONDITIONS (NO ROTARY EVAPORATORS OR JACKETED REACTORS ATTACHED).

C40 Circulating Chiller Features:

  • ETL tested to UL and CSA standards
  • No dry ice or liquid nitrogen needed
  • Advanced PID digital temp controller
  • A built-in chilling fluid filter protects the recirculating pump and prevents blockage.
  • All steel construction for durability
  • Eco-friendly R404A refrigerant
  • Cost saving as the water consumption is completely eliminated
  • Built-in casters for mobility
  • Insulated tubing included
  • Recommended for 50L rotary evaporators

Product Includes:

  • (1)  Ai C30 -30°C 40L capacity recirculating chiller
  • (1) 3/8" insulated chilling fluid tubing (11 feet)
  • (3)   1/2" NPT to 3/8" barb connector with on/off valve
  • (2)  3/4” NPT Male to 1/2” NPT female adapter
  • (1) Brush
  • (1)  PTFE sealing tape

This chiller is usually paired with our Ai Dual Jacketed 316SS Crystallization Filter Reactors for their condensing coils.

Additional information

Weight 480 lbs
Dimensions 47 × 31 × 52 in

Specifications

Model C30-40-50L
Temperature range Ambient to -30°C (No load)
Electrical requirements 220V 60Hz 1-PH 18A, 3,960 watts (Not compatible with 50Hz power)
Cooling capacity
(Assuming the working environment
25°C/77°F)
@ 32°F/0°C: 5,000W
@ 14°F/-10°C: 3,000W
@-4°F/-20°C: 1,800W
@-22°F/-30°C: 1,000W
Compressor Make: KK
Power: 208-230V 60Hz 1-PH
Number of compressor: one
Refrigerant: R404A (3.2 kgs)
Recirculating pump Model: 25PLBR30-10
Type: Centrifugal
Output: 280 watts
Pumping speed: 30 L/min or 8 gallon/min
Maximum pressure: 1 bar
Coolant outlet pressure Displayed on the built-in mechanical pressure gauge
Reservoir Material: Type 304 stainless steel, polished
Chilling fluid connection: 3/4″ NPT
Drain port: 1/2″ NPT
Overflow port: 3/8″ hose barb
Capacity: 40 liters or 10.6 gallons
Dimensions: 17.5 x 17.5 x 9.5″ (WxDxH)
Radiator Fan motor
Make: Boyoung
Model: YWF4E-400
Power: 220V 60Hz 1.3A 300W
Rotation speed: 1550 rpm
Flow rate: 4240 m3/hour
Cleaning
Clean radiator fins with a fin comb every three months
Temperature controller Type: Digital microprocessor PID controlled
Display unit: Celsius °C
Temperature accuracy: +/- 2°C
Temperature range: Ambient to -30°C
Temperature sensor type Pt100
Housing Powder-coated type 42 stainless steel
Recommended coolant For 50°F/10°C or higher:
distilled water
Between 50°F/10°C and -22°F/-30°C:
50% ethylene glycol + 50% distilled water
Working environment -15°C/5°F to 25°C/77°F, at <66% humidity
Built-in swivel casters Four
Unit/shipping dimensions 40 x 25 x 41″ / 46 x 30 x 51″ (WxDxH)
Unit/shipping weight 365 Lbs / 480 Lbs
Safety Compressor over-temp protection
Compressor delay start protection
Short circuit and ground protection
Over-current protection
Over-voltage protection
Recommended for rotary evaporators Ai 50L SolventVap rotary evaporators
Warranty One year
Compliance UL 61010-1 :2012 Ed.3+R:29Apr2016
CSA C22.2#61010-1 :2012 Ed.3