ACROSS INTERNATIONAL – DUAL JACKETED 316L SS DECARBOXYLATION REACTOR PACKAGE – 200L

$94,706.52

The 100L Dual Jacketed decarboxylation reactor package is made of 316L stainless steel and has everything you need to start your decarboxylation process out of the crate. The decarboxylation process is a chemical reaction that involves heating raw cannabinoids to a temperature to release a carboxyl group of molecules. Once this has happened, the major cannabinoids convert from THCa and CBDa to THC and CBD. This process may also include the removal of present residual solvents (ethanol, heptane, isopropyl, or hexane) used in the initial extraction or winterization process. The condenser and included chiller allow for the recapture of these solvents after being removed from the extract.

Ai 316L Stainless Steel Reactor Features:

  • Dual jacketed. A sealed outer insulation jacket provides the best temperature performance inside the chamber
  • All wetted parts on main vessel and lid built with pharmaceutical grade 316L SST
  • Shell and tube heat exchanger with 70 tubes for the best condensing results
  • ElectroPolished internal chamber
    • Greatly reduces surface roughness by levelling micro-peaks and valleys
    • Improved vacuum pressures, out-gassing rates, and pumping speed
    • Prolong equipment lifespan by reducing friction and wear
    • Much better sterilized and semiconductor-grade surface
    • Essential for the food and pharmaceutical industries
  • Detachable condenser and collection tanks
  • Dual collection tanks with big sight glass allow you to drain without breaking the vacuum
  • High drain port clearance for easy draining or added filtration
  • Large ports (top 12" bottom 6") allows easy chamber cleaning
  • Top placed vacuum port on the condenser provides better flow and condensing results
  • No messy cable, with space-saving integrated stirring motor controller
  • Heavy-duty stainless-steel frame with swivel casters
  • A built-in flashlight gives you a clear view inside the chamber
  • Positive/negative pressure gauge
  • Matte finish stainless steel
  • Customizable lid for various applications
  • Tons of tri-clamps adapters available, e.g. tri-clamp to hose barb/KF25/NPT
  • Choice of bolted or pin clamp for various pressure applications
  • Flexible bellow condenser connection reduces shipping damage
  • The electric motor and controller model is ETL certified to UL and CSA standards
  • Peer-reviewed model (pneumatic motor and controller) is approved to be used with Acetone, Ethanol, Heptane, Hexane, Isopropyl Alcohol, Methanol, and Pentane.

Package includes:

  • (1) SR200 stainless steel reactor with an electric motor (C!D1 Peer Review)
  • (1) Edwards nXDS20iC dry scroll pump
  • (1) KF25 flexible vacuum bellow - 2 metres
  • (2) KF25 quick clamp and centering ring (sets)
  • (1) KF25 to 1.5" Triclamp Adapter
  • (1) 1.5" Tri-Clamp Gasket (Viton)
  • (1) 1.5" Tri-Clamp Single Pin Clamp
  • (1) ULVAC 220V UDP-6 6 cfm 6 torr 2-head diaphragm pump
  • (1) KF25 Accessories Package
    • KF25-FC x 1
    • KF25-CR x 1
    • FVB-25-10 x 1
  • (1) Huber Unistat T305 +300C system
  • (1) Huber expansion tank, adapters, tubing and fluid
    • (3)   M20 (-20 to 195) 10L: 6162 (P/N 6162)
    • (2)   90° Adaptor M24x1,5female-M24x1,5 male (P/N 9256)
    • (2)   2m (-60 to 260) tubing (P/N 9327)
    • (2)  M24 X 1.5 (male) to 1" NPT male (P/N 10055)
    • (1)  5L expansion tank (P/N 10967)

Specifications

Model  SR200
 Electric stirring motor  220V, 50/60Hz, 1~Phase, 200 watts, 1/4 HP
 Rotation: 450 rpm max. (±8%)
 Starting torque: 3.0 N.m
 Rated torque: 1.54 N.m
 Built-in gearbox ratio: 3:1 to 180:1
 Controller: Delta, UL listed
 Pneumatic stirring motor  – Power: 1/4 HP
 – Rotation: 450 rpm max. (±8%)
 – Compressed air pressure range: 30 to 80 psi (0.2 to 0.55 MPa)
 – Working temperature: -10C to +70C
 – For constant use: set rpm to 80% of maximum rpm
 – Motor lubricant
Daphne Eponex EP-No. 1
Check/replenish/replace every 500 hours
 – Air lubricant
Type: JIS K2213-1 (ISOVG32)
Recommended products: Shell Vitrea Oil 32, JOMO Turbine 32, COSMO Turbine 32
Speed: 2-3 drops per minute
 – For safety purpose, detach compressed air supply when not in use, left un-attended or at night
 – Do not run motor un-loaded
 – Set Air Adjuster to minimum at initial run, make sure motor is working properly, before increasing CFM
 – Before inspecting unit, stop the motor and detach air supply. Do NOT inspect unit when motor is in action.
 – Make sure exhaust port/hole is clear from any debris or blockage
 – Check every 2-3 days: Air Lubricant, Air Filter water drain
 Port configuration  Lid: 6″ triclamp
 Center motor port: 3″ triclamp
 Drain port: 6″ triclamp
 Drain port on/off valve: 2″ triclamp
 Vacuum port: 1.5″ triclamp
 Condenser recirculating fluid port: 1/2″ female NPT
 Vessel jacket recirculating fluid port: 1″ female NPT
 Main vessel  Volume: 200L
 Material: 316L grade stainless steel
 Interior finish: ElectroPolished
 Agitator  Structure: propeller, 3-blade, dual-layer (standard)
 Style: quick-change
 Material: 316L grade stainless steel
 Detachable length: 28 inches
 Center fluid jacket  Volume: 35L
 Material: 304 grade stainless steel
 Outer insulation jacket  Sealed
 Material: 304 grade stainless steel
 Collection tank  10L x 2
 Material  All wetted parts 316L grade stainless steel on main reactor body
 Rest of reactor in 304 grade stainless steel
 Main Condenser  Style: shell and tube heat exchanger
 Number of tubes: 70
 Condensing area: 0.89 m2
 Pressure  Ultimate vacuum level: 1 Torr
 Temperature range  -55°C to +250°C (-67°F to +482°F)
 Temperature sensor/display  Regular: BOOST.TTA.0101, -200C to 480C, 50.5 clamp
 Explosion proof: BOOST.TTA.0102, -200C to 480C, 50.5 clamp
 Sealing gasket  Food grade Viton
 Main Mounting Frame  Heavy duty 2 x 2″ 304 grade stainless steel, mounted on four casters
 Drain port ground clearance  Drain port: 19.5 inches
 Drain valve: 14 inches
 Shipping Weight (Unit)  570 Lbs / 890 Lbs
 Shipping Dimensions  43 x 34 x 90″ (WxDxH)
 Compliance  ETL tested to UL and CSA standards