• CAD: $ 68,319.95

ETL-certified rotary evaporator package meets UL/CSA requirements. 220V 50/60Hz.


ETL-certified rotary evaporator package meets UL/CSA requirements. Most municipalities require this certification, which also ensures higher safety standards and a longer equipment lifespan.

The 50L Rotary Evaporator Package includes everything you need to start your solvent recovery process out of the box. As a bonus, it also includes a free dual 20L receiving flask upgrade. The items included in this package are as follows:

  • (1) Ai SolventVap 220V 1Ph 13-gallon (50L) rotary evaporator
  • (1) ULVAC 220V UDP-6 6 cfm 6 torr 2-head diaphragm pump  and vacuum hose
    • 3/8 Accessories Package
    • KF-38-1 x 1
    • VH.3F x 1
  • Huber 230V 3~Phase CS100 -20C 200L capacity recirculating chiller
  • Huber fluid, adapters and tubing
    • (1)  Mono Ethylene Glycol  (-50C to 121C) 113L ** Needs to be dilute 50-50 with tap water*
    • (2) G3/4″ to 3/8″ barb fitting
    • (2) 12 ft of insulated tubing
  • (2) Vertical main and auxiliary condensers with insulation
  • (1)  50L round-shaped evaporating flask, glass
  • (1) Dual 20L receiving flask
  • (1) Three-way tee vapour buffering flask, glass
  • (1) Glass vapour duct with seal (pre-installed)
  • (1) PTFE vacuum sealing kit (pre-installed)
  • (1) Receiving flask glass vacuum port with PTFE open/close valve, glass
  • (1) Glass material feeding tube with PTFE open/close valve and PTFE extension tube
  • (7) Flask quick clamp with PTFE centering ring
  • (1) Evaporating flask cap spanner, Allen key & screws
  • (1) Ai stainless steel 50L flask carrier/stand
  • (1) Ai plexglass bath cover for SolventVap 50L

Across International’s Official Canadian Distributor of High-Quality Products.

Across International rotary evaporators or rotovaps come with PTFE valves to ensure solvent resistance. Rapid heat-up is made possible by its optimized bath volume. Glass tubes used in the condenser unit have been designed to optimize surface area, thereby increasing evaporation efficiency. A rotary evaporator features a motor and worm gear designed for constant rotation at speeds up to 130 rpm. A thin layer of liquid is constantly transferred over the entire inner surface of the flask containing the solvent. The water bath gently heats the surface, creating a large area for evaporation. Special seals on the rotating system enable it to be placed under vacuum, which reduces the boiling point of the solvents and removes the vapor phase, thereby increasing efficiency.

Moreover, each unit is equipped with a vacuum release that is easy to use, which allows continuous feed. The digital water bath operates from ambient temperature to 99C (210F) with 0.1C step-by-step temperature control. Should the controller fail, the overheat protector will shut down the power. Standard Glassware Set contains a 20L round-bottomed evaporating flask, a 10L round-bottomed receiving flask, and a vertical condenser. Distilling solvents with higher boiling points is made easier by rotary evaporators with vertical glass condensers.

How does a Rotary Evaporator work?

Rotary evaporators (sometimes referred to as Rotavap or Rotovap) are used primarily to evaporate the solvent from samples under reduced pressure. Reduced pressure, or vacuum, is achieved by using a lab-grade chemical-resistant vacuum pump. Reduced pressure in the apparatus causes the solvent in the ‘boiling flask’ to boil at a lower temperature than at atmospheric pressure. This method of solvent evaporation is ideal for the Cannabis industry due to Cannabinoids and Terpenes tendency to degrade when exposed to high temperatures. Furthermore, Rotary Evaporators require a chiller that is plumbed into the ‘chilling coils’ where the solvent vapour is phase-changed to a liquid and recollected in the ‘receiving flask’. If done correctly, the solvent recovered will be pure and can be reused in the same or different application. It can be challenging to choose the right setup for your lab due to the wide variety of sizes, manufacturers, and prices of rotary evaporators. This is where Evolved Extraction Solutions can assist.


 Electrical Specifications
 220V 50/60Hz 1~Phase, 29A, 6400 watts (rotation speed: 400 watts)
 Glass material  High borosilicate glass 3.3
 Evaporating flask
 Capacity: 13.2 gallons (50 litres or 1.8 cu ft)
Maximum load: Not to exceed 60% of the capacity of the flask
Sealing flange: 4.9″ diameter
Rotation speed: 10 to 110 RPM
Evaporating speed: 
2 gallon/hour (water), 4 gallon/hour (alcohol)
 Receiving flask
 5.28 gallon (20 litres or 0.7 cu ft)
 Condenser  Glassware: Main + auxiliary triple-circulating cold traps, vertical
Chilling fluid connection: 3/8″ hose barb x 4 (2 on main + 2 on auxiliary)
Condensing surface
Main condenser: 11,500 cm2 or 12.4 sq ft
Auxiliary condenser: 4,000 cm2 or 4.3 sq ft
 Working environment
 5 to 95°F
 Water bath
 Temperature range: ambient to 99°C (210°F)
Temperature controller: digital
Dimensions: 22.1″ diameter x 12.2″ depth
Material: stainless steel
Media: distilled water only
Max. water level: not to exceed 1″ from the top rim of the bath
Number of heaters: three
Drain port: one
Lifting: Motorized + manual
Maximum lifting distance: 9 inches
 Vacuum level  < 3 torrs
 Vacuum sealing  PTFE + Viton gaskets
 Vacuum connection  3/8″ hose barb x 1
 Safety  Dry-run, over-temp shut-off, built-in circuit breakers
 Unit/shipping dimensions
 52 x 30 x 92″ (fully assembled) / 46 x 28 x 58″ (Evaporator), 41 x 34 x 32″ (glassware)
 Shipping weight  525 Lbs
 Compliance  ETL tested to UL and CSA standards