ACROSS INTERNATIONAL – -30C 30L RECIRCULATING CHILLER W/ CENTRIFUGAL PUMP – 220V
$8,360.79
Ai -30C Recirculating Chillers is an economical thermostatic control laboratory chiller. These laboratory chillers are ideal for cooling applications such as rotary evaporators, jacketed reactors, and condensing coils. This system replaces tap water cooling applications in the laboratory.
-30C Recirculating Chillers are compressor-based recirculating chillers that offer outstanding performance, high reliability, quiet operation, and ease of use. A powerful force/suction pump provides constant flow rates, while a microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.
IMPORTANT! -30C/-22F ULTIMATE TEMPERATURES ARE TESTED UNDER EMPTY LOAD CONDITIONS (NO ROTARY EVAPORATORS OR JACKETED REACTORS ATTACHED).
C30 Circulating Chiller Features:
- ETL tested to UL and CSA standards
- No dry ice or liquid nitrogen needed
- Advanced PID digital temp controller
- A built-in chilling fluid filter protects the recirculating pump and prevents blockage
- All steel construction for durability
- Eco-friendly R410A refrigerant
- Cost saving as the water consumption is eliminated
- Built-in casters for mobility
- Insulated tubing included
- Recommended for 20L rotary evaporators
Product Includes:
- (1) Ai -30°C/-22°F recirculating chiller
- (1) 3/8" insulated chilling fluid tubing (11 feet)
- (3) Â 3/8" stainless steel chilling fluid connector with on/off valve
- (1) Brush
- (1) Â PTFE sealing tape
This chiller is usually paired with our Ai Dual JacketedGlass Crystallization Filter Reactors for their condensing coils.
Additional information
| Weight | 280 lbs |
|---|---|
| Dimensions | 39 × 26 × 46 in |
Specifications
| Model | C30-30-20L |
| Temperature range | Ambient to -30°C (No load) |
| Electrical requirements | 220V 60Hz 1-PH 9A, 1,990 watts (Not compatible with 50Hz power) |
| Cooling capacity (Assuming the working environment 25°C/77°F) |
@ 32°F/0°C: 2,800W @ 14°F/-10°C: 1,800W @-4°F/-20°C: 1,000W @-22°F/-30°C: 500W |
| Compressor | Make: Panasonic Power: 208-230V 60Hz 1-PH Number of compressor: one Refrigerant: R410A |
| Recirculating pump | Type: Centrifugal Output: 100 watts Pumping speed: 20 L/min or 5.3 gallon/min Maximum head: 20 feet or 6 meter Maximum pressure: 5.8 psi |
| Coolant outlet pressure | Displayed on the built-in mechanical pressure gauge |
| Reservoir | Material: Type 304 stainless steel, polished Chilling fluid connection: 3/8″ hose barb x 2 Capacity: 30 liters or 8 gallons Dimensions: 23 x 15 x 7″ (WxDxH) |
| Temperature controller | Type: Digital microprocessor PID controlled Display unit: Celsius °C Temperature accuracy: +/- 2°C Temperature range: Ambient to -30°C |
| Temperature sensor type | Pt100 |
| Housing | Powder coated type 42 stainless steel |
| Recommended coolant | For 50°F/10°C or higher: distilled water Between 50°F/10°C and -22°F/-30°C: 50% ethylene glycol + 50% distilled water |
| Working environment | -15°C/5°F to 25°C/77°F, at <66% humidity |
| Built-in swivel casters | Four |
| Unit/shipping dimensions | 30 x 19.5 x 34″ / 38 x 25 x 45″ (WxDxH) |
| Unit/shipping weight | 220 Lbs / 280 Lbs |
| Safety | Compressor over-temp protection Compressor delay start protection Short circuit and ground protection Over-current protection |
| Recommended for rotary evaporators | Ai 20L SolventVap rotary evaporators |
| Warranty | One year |
| Compliance | UL 61010-1 :2012 Ed.3+R:29Apr2016 CSA C22.2#61010-1 :2012 Ed.3 |
